Highlight:
sand pumping machine
, gravel suction pump
Material: |
High Chrome A05 |
Theory: |
Centrifugal |
Use: |
Sand & Gravel |
Structure: |
Single Pump Casing |
Hardness: |
HRC 58-62 |
Type: |
Submersible Sand Dredging Pumps |
Application: |
Sewage,mining,slurry,Convey Tailing Slurry,Sand Pump |
Usage: |
Water,mining,slurry,sand,Gravel Pump |
Warranty: |
1 Years For Pump Except Wet End Parts |
12/10G Mining Suction Dredge Pump , Single Casing Sand Pumping Machine
12/10G-G Horizontal Centrifugal Sand Gravel Mining Suction Dredge Pump Single Casing
1.Introduction of CNSME® SG/250G (12/10G-G) Sand Gravel Pump:
SG Series sand gravel pumps are designed for continuous handling of the most difficult higher abrasive slurry, containing solids too large to be pumped by a standard slurry pump.
12/10G-G Sand Pump
1) Total Net Weight— 4450kg
2) Wet parts— Impeller (diameter: 864mm),Bowl, Back liner
3) Shaft seal— Packing seal, Expeller seal, Mechanical seal
Product features and application of the gravel sand pump:
1. the gravel pump is horizontal, single pump casing structure centrifugal pump.
2. Use special clamp clamping pump body and pump cover, the pump outlet can be adjusted in the any direction of 360 degrees, easy to install and use.
3. The bearing components with cylindrical structure, easy to adjust the gap between the impeller and the pump body to keep long working life .
4. Bearing with grease lubrication.
5.Gravel pump has three kinds of shaft seal including packing seal, vice impeller seal, mechanical seal.
6. Wide flow channel , good cavitation performance, high efficiency, abrasion resistance.
7.Transmission methods are: V-shaped V-belt driven, flexible coupling driven, gearbox transmission, hydraulic coupling driven, thyristor speed control speed and so on.
8.Over-flow components Material: nickel-containing high-chromium wear-resistant alloy.
9.Using variety speed and variants, making the pump running in the best conditions .
10. Long working life and high operating efficiency can meet a variety of bad working conditions.
2. Specifications of CNSME® SG/250G (12/10G-G) Sand Gravel Pump:
| Model |
SG-250G (12/10G) |
| Outlet |
12-inch |
| Capacity |
720-2880m3/h |
| TDH |
10-70m |
| Rated Motor Power |
600Kw |
| Speed |
300-700r/min |
| NPSH |
2-8m |
| SG(SHG) Series Metal Gravel Pump Specifations |
| |
Pump
Model |
S×D
(inch) |
Allowable
Max. Power
(kw) |
Material |
Clear Water Performance |
Impeller |
Pricing |
| Capacity Q |
Head
H(m) |
Speed
n(r/min) |
Max.Eff.
η% |
NPSH
(m) |
No. of
Vanes |
Vane Dia.
(mm) |
Weight
(kg) |
| Impeller |
m3/h |
l/s |
| SG/100D |
6×4 |
60 |
Metal
(A05) |
36-250 |
10-70 |
5-52 |
600-1400 |
58 |
2.5-3.5 |
3 |
378 |
460 |
| SG/150E |
8×6 |
120 |
126-576 |
35-160 |
6-45 |
800-1400 |
60 |
3-4.5 |
391 |
1120 |
| SG/200F |
10×8 |
260 |
216-936 |
60-260 |
8-52 |
500-1000 |
65 |
3-7.5 |
533 |
2250 |
| SG/200S |
10×8 |
560 |
216-936 |
60-260 |
8-52 |
500-1000 |
65 |
3-7.5 |
533 |
2285 |
| SHG/200S |
10×8 |
560 |
360-1260 |
100-350 |
20-80 |
500-950 |
72 |
2-5 |
686 |
3188 |
| SG/250G |
12×10 |
600 |
360-1440 |
100-400 |
10-60 |
400-850 |
65 |
1.5-4.5 |
667 |
4450 |
| SHG/250G |
12×10 |
600 |
360-2160 |
100-600 |
20-80 |
350-700 |
73 |
2-8 |
915 |
4638 |
| SG/300G |
14×12 |
600 |
432-3168 |
120-880 |
10-64 |
300-700 |
68 |
2-8 |
864 |
5400 |
| SG/300T |
14×12 |
1200 |
432-3168 |
120-880 |
10-64 |
300-700 |
68 |
2-8 |
1120 |
|
| SG/350G |
16×14 |
600 |
720-3240 |
200-900 |
20-42 |
300-500 |
70 |
3-9 |
2250 |
11000 |
3. Construction of CNSME® SG/250G (12/10G-G) Sand Gravel Gravel Pumps:
4. Performance Curve of CNSME® SG/250G (12/10G-G) Sand Gravel Pump:
5.Typical Applications of CNSME® SG/250G (12/10G-G) Sand Gravel Pump:
Sand and Gravel
Sand Excavation
Hydraulic Mining
Cyclone Feeds
Slag Granulation
Tunnelling
Brine Mixture
Sludge and Solids
6.Tradeshow:
Your message must be between 20-3,000 characters!
