Heavy Duty Big Particle Gravel Sand Pump For River Dredging High Chrome A05

Heavy Duty Big Particle Gravel Sand Pump Used In River Dredging

Introduction:

The  10/8F-G sand pump is designed for continuously handling the most difficult higher abrasive slurries

which contain too big solids to be pumped by a common pump. Such as dredging, suck gravel in the

dredger, suck gravel in the course of rivers or lakes,delivering slurries in mining, explosive sludge in metal

smelting.

Gravel sand pump is designed for continuously handing the most difficult higher abrasive slurries which contain too big solids. The big particle gravel sand pump is casted as a single pump casing structure with smooth over-current channel .The overflow part is made of hard nickel and high chromium wear resistant alloy. The outlet direction of gravel pump can be adjusted according to the request direction. The gravel sand pump is suitable for delivering strong abrasive slurry containing bigger particles in mining, explosive sludge in metal melting, dredging and so on. The advantages of the pump are heavy flow, easy installation and operation, good performance of NPSH and abrasion resistance.

Specification:

a) Caliber: DN100-DN450mm

b) Flow:36-3000m3/hr

c) Head:7-80 m

d) Rotate speed:300-1400r/min

e) Motor power:60-1200 KW

f) Allowable max partical size:82-241mm

Specifications:

Explosive View of SG Gravel Pumps:

Standard Material of Wet-end Parts: Hi-Chrome Alloy A05

Typical Applications:

Sand and Gravel

Sand Excavation

Hydraulic Mining

Cyclone Feeds

Slag Granulation

Tunnelling