Fam10145wrt1a05 Heavy Duty Slurry Pump Impeller To Oem Wrt1

FAM10145WRT1A05 Heavy Duty Slurry Pump Impeller Interchangeable Spare Parts to OEM WRT1 Slurry Pumps

1. Introduction:

FAM10145WRT1 is the impeller for the upgraded heavy duty pumps - WRT Slurry pumps. This wear reduction technology increases the service life of the impellers and has higher efficiencies and lower NPSHr compared with the classic slurry pumps. Materials are available in hard alloy and elastomers.  

There are three different types of slurry pump impellers. Open, closed and semi -open. Everyone has their own advantages and disadvantages, depending on the application. Some are better applicable to solid treatment, while others better improve high efficiency. You must understand more information about each type of detail.

Any type of Impeller can be used in the application of the slurry, but the closed pulp pump impeller is more common because they have high tolerance and abrasion resistance. Open slurry pump Imeller can be used for high concentrations, because their blockage may be less likely. For example, in high -density paper reserves, small fibers may block Imeller. Poch pulp may be difficult, you want to avoid blocking pumps at all costs.

Slurry Pumps installed with WRT1 Impellers: 

2. Replacement Slurry Pump Impellers:

3. Components:

Impeller
The impeller, either elastomer, stainless steel or high-chrome material, is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.

Casing
Split outer casing halves of cast contain the wear liners and provide high operation pressure capabilities. The casing shape is generally of semi-volute or concentric, efficiencies of which are less than that of the volute type.

Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy-duty roller bearing are housed in a removable bearing cartridge.

Shaft sleeve
A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals at both ends protects the shaft. A split fit allows the sleeve removed or installed quickly.

Shaft Seal
Expeller drive seal, Packing seal, Mechanical seal.

Drive Type
V-belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.

5.Performance Curve of 12/10-WRT Slurry Pump with FAM10145WRT1A05 impeller: 

6.Typical Applications:

CNSME® Rubber Slurry Pump Parts are widely used for Centrifugal horizontal slurry pumps, Vertical rubber slurry pumps, R rubber slurry pumps, Chemical slurry pumps, Silica sand slurry pumps, Minerals processing slurry pumps, De-Watering Screen Pump, Ore sand pumps, Tailings Pump, Pipe-jacking slurry pumps, Ball mill discharge Pump, Tunnelling slurry pumps, Mixing tank slurry Pump, Wet crushers slurry pumps, SAG mill discharge pumps, Ball mill discharge pumps, Rod mill discharge slurry pumps, Ni acid slurry pumps, Coarse sand pumps, Coarse tailings pumps, Phosphate matrix slurry pumps, Scrubber slurry Pump, Minerals concentrate pumps, Heavy media slurry pumps, Dredging Sand slurry pumps, Bottom ash slurry pumps, Fly s, Lime grinding pumps, Screen feed Pump, Oil sands pumps, Mineral Sands pumps, Fine tailings pumps, Tailings booster Pump, Thickner Tailings Pump, Process recycle Pump, Pipeline transfer pumps, Phosphoric acid slurry pumps, Coal slurry pumps, Flotation pumps.