Highlight:
industrial heavy duty slurry pump
, mining heavy duty slurry pump
, 6 × 4 heavy duty slurry pump
6 × 4 Mining Industrial Heavy Duty Slurry Pump
6 × 4 Mining Industrial Sludge Pumps for Slurry Pumping for Mines and Mineral Processing Plants
Typical Applications: CNSME SH Slurry pumps are designed for the toughest slurry applications, examples are listed below:
Sludge and Solids
Sand and Aggregate
Mining Industries
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Minerals Processing
Aggregate Processing
Specifications:
| Type |
Size |
Frame |
Impeller: E4147A05 |
Shaft Seal Type |
Frame Rating(kw) |
Normal Max Speed(r/min) |
Max Passage Size(mm) |
|
SH
|
100
6/4
|
D |
5 Vanes, Diameter:365mm
Closed Type
|
Gland Packing, Expeller, Mechanical Seal |
60 |
1600 |
51 |
Introduction:
1. Shaft Seal: Expeller/Centrifugal Seal
The effect of expeller/centrifugal seal is by use of pressure which is generated by impeller and expeller. And use packings or lip seal as shut down seal. Picture shows as below:
2. Components:
Impeller
The impeller, either elastomer, or high-chrome material, is the main rotating component which normally has vanes to impart the centrifugal force to the liquid. The impeller can be varied in vane numbers. The standard design is 5-vane impeller, options of 4-vane, 6-vane are also available.
Casing
Split outer casing halves of cast contain the wear liners and provide high operation pressure capabilities. The casing shape is generally of semi-volute or concentric, efficiencies of which are less than that of the volute type. Material of the outter casings are grey iron or ductile iron.
Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy-duty roller bearing are housed in a removable bearing cartridge. Shaft material options are Carbon Steel, Stainless steel of SUS304, SUS316.
Shaft sleeve
A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals at both ends protects the shaft. A split fit allows the sleeve removed or installed quickly. Materails of shaft sleeves are SUS304, SUS316, Ceramic coated, and Tungstun Carbide coated.
Shaft Seal
Expeller drive seal, Packing seal, Mechanical seal.
Drive Type
V-belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Pedestal/Base plate
Compact pedestal for rigid vibration-free support. Designed to allow retrofit to existing installations.
3. Slurry pumps are made for high wearing and heavy duty applications. Our pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping application. We specialise in handling the toughest and most abrasive applications and have taken this to a new level with the SH (War-man ) series.
4. The primary applications for the SME SH/100D(6/4D-) metal slurry pumps are mill discharge, crusher slurry, sand and aggregate or any coarse solids or other severe, abrasive slurries especially in te copper, gold, iron ore, lead-zinc, coal or phosphate plants.
The most dramatic savings will be in these applications, though savings will also be realized on find solids, like fine sand recovery or kaolin. The key advantage of the SH metal slurry pumps is the 10% to 30% lower power, long even wear life and less pump downtime, which results in lowe cost-per-ton pumped, along with better cyclone separation.
Material: High Chrome Alloy A05
Material Chemical Requirements, Weight%
| Description |
Material Name |
C |
Mn |
Si |
Ni |
Cr |
Mo |
Cu |
P |
V |
S |
Description |
Hardness |
|
A05
ASTM A532
|
Ultrachrome |
2.92 |
0.98 |
0.54 |
0.8 |
27 |
≤0.8 |
... |
0.062 |
... |
0.051 |
27% Cr Erosion Resistant White Iron |
58-62HRC |
Performance Curve:
| 6/4 Slurry Pump SH Series Metal Slurry Pump Specifications |
| |
Pump
Model |
S×D
(inch) |
Allowable
Max. Power (kw) |
Material |
Clear Water Performance |
Impeller |
Pricing |
| Capacity Q |
Head
H(m) |
Speed
n(r/min) |
Max.Eff.
η% |
NPSH
(m) |
No. of
Vanes |
Vane Dia.
(mm) |
Weight
(kg) |
| Impeller |
m3/h |
l/s |
| SH/25B |
1.5×1 |
15 |
Metal
(A05) |
12.6-28.8 |
3.5-8 |
6-68 |
1200-3800 |
40 |
2-4 |
5 |
152 |
91 |
| SH/40B |
2×1.5 |
15 |
32.4-72 |
9-20 |
6-58 |
1200-3200 |
45 |
3.5-8 |
184 |
118 |
| SH/50C |
3×2 |
30 |
39.6-86.4 |
11-24 |
12-64 |
1300-2700 |
55 |
4-6 |
214 |
191 |
| SH/75C |
4×3 |
30 |
86.4-198 |
24-55 |
9-52 |
1000-2200 |
71 |
4-6 |
245 |
263 |
| SH/75D |
4×3 |
60 |
245 |
363 |
| SH/100D |
6×4 |
60 |
162-360 |
45-100 |
12-56 |
800-1550 |
65 |
5-8 |
365 |
626 |
| SH/100E |
6×4 |
120 |
365 |
728 |
| SH/150E |
8×6 |
120 |
360-828 |
100-230 |
10-61 |
500-1140 |
72 |
2-9 |
510 |
1473 |
| SH/150F |
8×6 |
260 |
510 |
1496 |
| SH/150R |
8×6 |
300 |
510 |
1655 |
| SH/200F |
10×8 |
260 |
612-1368 |
170-380 |
11-61 |
400-850 |
71 |
4-10 |
686 |
3193 |
| SH/200ST |
10×8 |
560 |
612-1368 |
170-380 |
11-61 |
400-850 |
71 |
4-10 |
686 |
3750 |
| SH/250F |
12×10 |
260 |
936-1980 |
260-550 |
7-68 |
300-800 |
82 |
6 |
762 |
3760 |
| SH/250ST |
12×10 |
560 |
936-1980 |
260-550 |
7-68 |
300-800 |
82 |
6 |
762 |
4318 |
| SH/300ST |
14×12 |
560 |
1260-2772 |
350-770 |
13-63 |
300-600 |
77 |
3-10 |
965 |
6409 |
| SH/350TU |
16×14 |
1200 |
1368-3060 |
380-850 |
11-63 |
250-550 |
79 |
4-10 |
1067
|
10000
|
Components Drawing:
Slurry Pump with Motor Support:
Your message must be between 20-3,000 characters!
