|
Product Details:
Payment & Shipping Terms:
|
| Material: | High Chrome Alloy A05 | Feature: | Heavy Duty |
|---|---|---|---|
| Type: | Horizontal | Principle: | Centrifugal |
| Use: | Abrasive Slurries | Seal Type: | Expeller Ring Seal, Packing Seal, Mechanical Seal |
| High Light: | high chrome slurry pump,industrial slurry pump |
||
Horizontal Slurry Pumps, High Efficiency Metal SH Slurry Pums
Introduction:
SH/75D(4/3D-) is heavy duty,metal lined horizontal slurry pump, the capacity is 86.4-198m3/h with 9-52m Head.
It is designed and bulit for long life with low maintenance:
1. Shaft Sleeve: A hardened, heavy-duty corrosion-resistant sleeve with “O” Ring seal at both ends protects the shaft. A slip fit allows the sleeve removed or installed quickly.
2. Centrifugal Shaft Seal: A large precentage of duties allow the use of the centrifugal seal which eliminates the need of sealing water.
3. Gland Shaft Seal: Apacked gland type shaft seal is also acailable and can be fitted with a low flow or a full flow flish seal water arrangement.
4. Shaft and Bearing Assembly: A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy -duty roller bearings are housed in a removable bearing cartridge.
5. Pump Base: A minimum number of through bolts hold the pump casing to a the frame. A means of impeller adjustment is provided in a convenient positopn below the bearing housing.
6. Outer casing: Split outer casing halves of cast or dectile iron contain the wear liners and provide high operation pressure capabilities.
7. Impeller: The impeller may be either moulded elastomer or hard metal. Deep size sealing canes relieve seal pressure and minimize recirculation. Cast-in impeller threads are better suited for slurries.
8. Interchangeable Hard Metal and Moulded Elastomer Liners: Mating faces in hard metal liners are tapered to allow positive alignment during assembly and allow components to be easily removed for replacement. Hydraulic seal rings give positive sealing between mating faces.
Specifications:
| Model | SH/75D |
| Oulet | 3-inch |
| Capacity | 86.4-198m3/h |
| TDH | 9-52m |
| Rated Motor Power | 30Kw |
| Speed | 1000-2200r/min |
| NPSH | 4-6m |
Construction of SH Slurry Pumps:
Standard Material of Wet-end Parts: Hi-Chrome Alloy A05
Typical Applications:
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Performance Curve:
| Sales office:260# West Huaian Road, Shijiazhuang, Hebei, China. 050051 | |
| +86-311-6669-2398 | |
