Payment & Shipping Terms:
|Impeller:||5-Vane Closed Type||Power:||Max. 60Kw|
industrial slurry pump,
heavy duty centrifugal pump
White Iron Metal Lined A05 Bare Shaft Slurry Pump SH100D Interchangeable with 6 / 4 D AH
Typical Applications: SME SH (War-man AH) Slurry pumps are designed for the toughest slurry applications
Sludge and Solids
Sand and Aggregate
Pulp and Paper
Our standard material for the wear parts of our slurry pumps is high chrome alloy A05, which is a wear resistant white iron that offers excellemt performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy A05 is provided by the presence of hard carbides within its microstructure. Alloy A05 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required.
|Type||Size||Frame||Impeller: E4147A05||Shaft Seal Type||Frame Rating(kw)||Normal Max Speed(r/min)||Max Passage Size(mm)|
5 Vanes, Diameter:365mm
|Gland Packing, Expeller, Mechanical Seal||60||1600||44|
1. Shaft Seal: Expeller Seal
The effect of expeller seal is by use of pressure generated by impeller and expeller. And use packings or lip seal as shut down seal. Picture shows as below:
The impeller, either elastomer, stainless steel or high-chrome material, is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.
Split outer casing halves of cast contain the wear liners and provide high operation pressure capabilities. The casing shape is generally of semi-volute or concentric, efficiencies of which are less than that of the volute type.
Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy-duty roller bearing are housed in a removable bearing cartridge.
A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals at both ends protects the shaft. A split fit allows the sleeve removed or installed quickly.
Expeller drive seal, Packing seal, Mechanical seal.
V-belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Compact pedestal for rigid vibration-free support. Designed to allow retrofit to existing installations.
3. Slurry pumps are made for high wearing and heavy duty applications. Our pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping application. We specialise in handling the toughest and most abrasive applications and have taken this to a new level with the SH (War-man AH) series.
4. The primary applications for the SME SH/100D(6/4D-AH) metal slurry pumps are mill discharge, crusher slurry, sand and aggregate or any coarse solids or other severe, abrasive slurries especially in te copper, gold, iron ore, lead-zinc, coal or phosphate plants.
The most dramatic savings will be in these applications, though savings will also be realized on find solids, like fine sand recovery or kaolin. The key advantage of the SH metal slurry pumps is the 10% to 30% lower power, long even wear life and less pump downtime, which results in lowe cost-per-ton pumped, along with better cyclone separation.
Material: High Chrome Alloy A05
Material Chemical Requirements, Weight%
|Ultrachrome||2.92||0.98||0.54||0.8||27||≤0.8||...||0.062||...||0.051||27% Cr Erosion Resistant White Iron||58-62HRC|
Construction of SH Slurry Pumps:
|AH Slurry Pump SH Series Metal Slurry Pump Specifications|
Max. Power (kw)
|Material||Clear Water Performance||Impeller||Pricing|
Contact Person: admin