Payment & Shipping Terms:
|Material:||Natural Rubber R55||Color:||Black|
|Use:||For Rubber Slurry Pump||Application:||For Acidic Slurry|
|Feasure:||Corrosive Resistant||Part Code:||D3147R55|
slurry pump replacement parts,
spare parts for pumps
Pump Impeller Standard Rubber Lined , Low Hardness Rubber Impeller
The above shown spare parts are rubber impellers for pump SHR/75C (4/3C-AHR) and SHR/40B (2/1.5B-AHR). The smaller impellers are open type, and the bigger one is closed type. The material of these impellers is R55. R55 is a new type of black natural rubber, of low to medium hardness. R55 is used for impellers and rubber liners where superior erosive resistance is required in fine partical slurries.
The Impeller is one of the most important part of slurry pump. When impeller is rotating, the slurry pump could meet the requirements of the equipment. However, it is a component which is worn out very easily. Therefore, for long service life of the impeller, the material plays an important role here.
Shifang Pump offers two solutions for the problem of long service life. We choose the high chrome (Cr26) for the strong abrasive slurries with sharp particles. For the corrosive slurries with blunt particles, we recommend the natural rubber.
(1).Scientific design based on hydraulic theories.
(2).Strict manufacture procedures and specialized QC personnel.
(3).Various materials for different applications.
(4).Long service life.
(5).Best product performance.
(6).Short delivery time.
|Natural Rubber R55||Standard|
|300% Stretching Strength(MPa)||≥4|
|Elongation at Break(%)||≥500|
|Tensile Set at Break(%)||≤25|
|Rubber to Metal Bonding Pull Strength(MPa)||≥5|
|Akron Abrasion cm3/1.61km||≤0.08|
|Acid & Alkali Resistant PH Value(Liquid)||
Explosive of Rubber Lined Slurry Pump:
SME orders of Rubber Pump Spare Parts:
Contact Person: admin