|
Product Details:
Payment & Shipping Terms:
|
| Material: | Natural Rubber R55 | Color: | Black |
|---|---|---|---|
| Use: | For Rubber Slurry Pump | Application: | For Acidic Slurry |
| Impeller: | 5-Vanes Open | Feasure: | Corrosive Resistant |
| Part Code: | F6036R55 | ||
| High Light: | slurry pump replacement parts,spare parts for pumps |
||
Frame Plate Liner F6036R55 Corrosion Resistant Pump Liners
Description:
Frame plate liner is the main part of the wetted parts of a rubber lined slurry pump. In a slurry pump the impeller and inside of the casing are always exposed to the slurry and have to be protected accordingly against wear. Material selection for impeller and casing is just as important as the pump selection itself.
The corrosion (and chemical attacks) of the wet parts in a Slurry Pump is a complex phenomenon both for metal and elastomer material. Natural rubber is by far the major elastomer in slurry pumping. Most cost effective for fine solids. Generally, depending on their sharpness and density, particle sizes of up to 5-8 mm can be pumped. Warning! Oversize scrap and sharp particles can destroy the wear parts, especially the impeller.
Specifications:
| Natural Rubber R55 | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) |
3-12≤65℃ |
Explosive of Rubber Lined Slurry Pump:
SME orders of Rubber Pump Spare Parts:
Contact Person: CNSME
Tel: +8613333119820
| Sales office:260# West Huaian Road, Shijiazhuang, Hebei, China. 050051 | |
| +86-311-6669-2398 | |
