Highlight:
slurry pump replacement parts
, spare parts for pumps
High Chrome Steel Slurry Pump Parts and Pump Components for Complete Slurry Pumps
High Chrome Steel Slurry Pump Parts and Pump Components for Complete Slurry Pumps
Introduction:
The unique design of slurry pumps is that they have interchangeable wet-end spare parts. Not only that it can be replaced by a new one when the current one is broken, but that the metal parts can be replaced by rubber ones.
The wet-end spare parts are also called the wear spare parts, and the main wear parts are Volute, impeller, throatbush and frame plate liner insert.
Slurry pumps are made for high wearing and heavy duty applications. Our pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping application. We specialise in handling the toughest and most abrasive applications and have taken this to a new level with the SH (War-man ) series.
Components:
Impeller
The impeller, either elastomer, stainless steel or high-chrome material, is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.
Casing
Split outer casing halves of cast contain the wear liners and provide high operation pressure capabilities. The casing shape is generally of semi-volute or concentric, efficiencies of which are less than that of the volute type.
Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy-duty roller bearing are housed in a removable bearing cartridge.
Shaft sleeve
A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals at both ends protects the shaft. A split fit allows the sleeve removed or installed quickly.
Shaft Seal
Expeller drive seal, Packing seal, Mechanical seal.
Drive Type
V-belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Typical Applications:
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Material: High Chrome Alloy A05
Material Chemical Requirements, Weight%
| Description |
Material Name |
C |
Mn |
Si |
Ni |
Cr |
Mo |
Cu |
P |
V |
S |
Description |
Hardness |
| A05 |
Ultrachrome |
2.92 |
0.98 |
0.54 |
0.8 |
27 |
≤0.8 |
... |
0.062 |
... |
0.051 |
27% Cr Erosion Resistant White Iron |
58-62HRC |
Construction of SH Slurry Pumps:
Performance Curve:
| Slurry Pump SH Series Metal Slurry Pump Specifications |
| |
Pump
Model |
S×D
(inch) |
Allowable
Max. Power (kw) |
Material |
Clear Water Performance |
Impeller |
Pricing |
| Capacity Q |
Head
H(m) |
Speed
n(r/min) |
Max.Eff.
η% |
NPSH
(m) |
No. of
Vanes |
Vane Dia.
(mm) |
Weight
(kg) |
| Impeller |
m3/h |
l/s |
| SH/25B |
1.5×1 |
15 |
Metal
(A05) |
12.6-28.8 |
3.5-8 |
6-68 |
1200-3800 |
40 |
2-4 |
5 |
152 |
91 |
| SH/40B |
2×1.5 |
15 |
32.4-72 |
9-20 |
6-58 |
1200-3200 |
45 |
3.5-8 |
184 |
118 |
| SH/50C |
3×2 |
30 |
39.6-86.4 |
11-24 |
12-64 |
1300-2700 |
55 |
4-6 |
214 |
191 |
| SH/75C |
4×3 |
30 |
86.4-198 |
24-55 |
9-52 |
1000-2200 |
71 |
4-6 |
245 |
263 |
| SH/75D |
4×3 |
60 |
245 |
363 |
| SH/100D |
6×4 |
60 |
162-360 |
45-100 |
12-56 |
800-1550 |
65 |
5-8 |
365 |
626 |
| SH/100E |
6×4 |
120 |
365 |
728 |
| SH/150E |
8×6 |
120 |
360-828 |
100-230 |
10-61 |
500-1140 |
72 |
2-9 |
510 |
1473 |
| SH/150F |
8×6 |
260 |
510 |
1496 |
| SH/150R |
8×6 |
300 |
510 |
1655 |
| SH/200F |
10×8 |
260 |
612-1368 |
170-380 |
11-61 |
400-850 |
71 |
4-10 |
686 |
3193 |
| SH/200ST |
10×8 |
560 |
612-1368 |
170-380 |
11-61 |
400-850 |
71 |
4-10 |
686 |
3750 |
| SH/250F |
12×10 |
260 |
936-1980 |
260-550 |
7-68 |
300-800 |
82 |
6 |
762 |
3760 |
| SH/250ST |
12×10 |
560 |
936-1980 |
260-550 |
7-68 |
300-800 |
82 |
6 |
762 |
4318 |
| SH/300ST |
14×12 |
560 |
1260-2772 |
350-770 |
13-63 |
300-600 |
77 |
3-10 |
965 |
6409 |
| SH/350TU |
16×14 |
1200 |
1368-3060 |
380-850 |
11-63 |
250-550 |
79 |
4-10 |
1067
|
10000
|
Your message must be between 20-3,000 characters!
