Product Details:
Payment & Shipping Terms:
|
Material: | Natural Rubber | Theory: | Centrifugal |
---|---|---|---|
Usage: | Ground Ore Slurry Pumping | Impeller: | Open Blades |
Structure: | Double Casing | Drive Type: | Motor With Pulley And Belts |
Seal Type: | Expeller Ring Seal | ||
High Light: | centrifugal slurry pump,slurry pumps for mining |
Rubber Lined Slurry Pumps on Duty in a Copper Concentrating Plant Pumping
Introduction:
Slurry pumps can be used to extract filtrate under high vacuum in a coal washery; can be used for handling combined bottom and fly ash in a thermal power station; can be used in series delivering copper tailings throgh pipelines; can be used to deliver iron sand slurry to dewatering cyclones; can be used for handling hot caustic slurry in an alumina plant.
Bearing assembly: a large diameter shaft with a short overhang minimises deflection and vibration. Heavy duty roller bearings are housed in a removeable bearing cartridge.
Specifications:
Model | SHR-50C |
Outlet | 2-inch |
Capacity | 36-75.6m3/h |
TDH | 13-46m |
Rated Motor Power | 30Kw |
Speed | 1300-2300r/min |
NPSH | 2-4m |
ypical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber
Natural Rubber | Standard |
Hardness(Shore A) | 52±3 |
300% Stretching Strength(MPa) | ≥4 |
Tensile Strength(MPa) | ≥21 |
Elongation at Break(%) | ≥500 |
Tensile Set at Break(%) | ≤25 |
Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
Akron Abrasion cm3/1.61km | ≤0.08 |
Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
Type | Size | Frame | Impeller:C2147 | Shaft Seal | Frame Rating(kw) | Normal Max Speed(r/min) | Max Passage Size(mm) |
R | 50 | C | 5 Open Type Rubber Vans, Diameter:215mm | Gland Packing, Expeller, Mechanical Seal | 30 | 2100 |
21 |
SHR Series Rubber Lined Slurry Pump Specifations & Prices | ||||||||||||
Pump Model |
S×D (inch) |
Allowable Max. Power (kw) |
Material | Clear Water Performance | Impeller | Pricing | ||||||
Capacity Q | Head H(m) |
Speed n(r/min) |
Max.Eff. η% |
NPSH (m) |
No. of Vanes |
Vane Dia. (mm) |
Weight (kg) |
|||||
Impeller | m3/h | l/s | ||||||||||
SHR/25B | 1.5×1 | 15 | Rubber () |
10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | 3 | 152 | 77 | |
SHR/40B | 2×1.5 | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 | 104 | |
SHR/50C | 3×2 | 30 | 36-75.6 | 10-21 | 13-39 | 1300-2100 | 2-4 | 213 | 154 | |||
SHR/75C | 4×3 | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 | 236 | ||
SHR/75D | 4×3 | 60 | 245 | 290 | ||||||||
SHR/100D | 6×4 | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 | 454 | ||
SHR/100E | 6×4 | 120 | 365 | 635 | ||||||||
SHR/150E | 8×6 | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 | 982 | ||
SHR/150F | 8×6 | 260 | 510 | 1390 | ||||||||
SHR/150R | 8×6 | 300 | 510 | |||||||||
SHR/200F | 10×8 | 260 | 540-1188 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 686 | 2581 | ||
SHR/200ST | 10×8 | 560 | 540-1188 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 686 | 3130 | ||
SHR/250F | 12×10 | 260 | 720-1620 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | 762 | 2807 | ||
SHR/250ST | 12×10 | 560 | 720-1620 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | 762 | 3357 | ||
SHR/300F | 14×12 | 260 | 1152-2520 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 965 | 4123 | ||
SHR/300ST | 14×12 | 560 | 1152-2520 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 965 | 4672 |
Bearing Assembly:
Bearing assembly: a large diameter shaft with a short overhang minimises deflection and vibration. Heavy duty roller bearings are housed in a removeable bearing cartridge.
Construction of a Slurry Pump: Rubber and Metal Lined
1. Frame Plate 2. Expeller Ring
3. Packing Gland 4. Shaft Sleeve
5. Expeller 6.Frame Plate Liner
7. Impeller 8. Cover Plate Liner
9. Cover Plate
Contact Person: CNSME
Tel: +8613333119820