|
Product Details:
Payment & Shipping Terms:
|
| Pressure: | Middle Pressure Pump | Casing: | Single Casing |
|---|---|---|---|
| Impeller: | Rubber Lined | Pump Casing: | Horizontal Split Pumps |
| Driven: | Electric Motor / Diesel Engine | Usage: | Paper And Pulp |
| High Light: | rubber slurry pump,slurry pumps for mining |
||
Paper and Pulp Industrial Slurry Pump with Discharge 4 inch and Suction 6 inch
Introduction:
6/4E-R rubber slurry pumps are widely used in many differing industries, some of which are listed as below:
1. Palm oil, phosphate, potash, papaer and pulp, sand and gravel, silver, steel, sugar;
2. Tar sands, tin, titanium, tobacco, uranium, water and sewerage utilities, woldram and scheelite.
Below is a rubber pump 6/4E-R used in Peru, for the handling of quarries. Over the past 7 years, our client only changed the inner liners for twice, with other parts of this pump remaining workable.
Specifications:
| Model | SHR-100E |
| Outlet | 4-inch |
| Capacity | 144-324m3/h |
| TDH | 12-45m |
| Rated Power | 120Kw |
| Speed | 800-1350r/min |
| NPSH | 3-5m |
Construction of Slurry Pump:
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Impeller and Inner Liners Material: Black Rubber
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12 ≤65℃ |
Performance Curve:
| Sales office:260# West Huaian Road, Shijiazhuang, Hebei, China. 050051 | |
| +86-311-6669-2398 | |
